A welcome page with the set of instructions is shown at the beginning, just click on ‘Get started’ to go forward and Select 3D LIDAR.
Users needs to choose the targetless calibration. The targetless calibration just uses the scene captured in both LiDAR and the Vehiclesensor data.
Select Targetless calibration and give calibration and Lidar name and click on set details.
4. Upload LIDAR files:
User needs to upload pcd files and click on continue.
Continue button would be disabled until pcd files are selected.
Supported Format: pcd
5. Run Calibration:
Users need to click on Calibrate.
The extrinsic parameters can be viewed to the right.
Visualization shows the planes which are detected and also the lidar and the vehicle coordinates. This also shows the vehicle corners on the ground. The planes can be deselected. Also, the fused point cloud can be deselected, to just look at the vehicle and the lidar axes and the vehicle body.
Extrinsic parameters can be exported to a json file using the button in the top right corner.
Extrinsic Calibration Output:
roll, pitch, yaw are in degrees and px, py, pz are in meters.
roll, pitch, yaw, px, py, pz are the extrinsic parameters downloaded from the calibration tool.
vehiclePoint3D is the 3d coordinates of a point in the vehicle coordinate system.
lidarPoint3D is the 3d coordinates of a point in the lidar coordinate system.